Here's a simple example of a unicorn drawn using TikZ in LaTeX. You can copy and paste this code into your LaTeX document to see the unicorn.
```latex
\documentclass{standalone}
\usepackage{tikz}
\begin{document}
\begin{tikzpicture}
% Body
\draw (0,0) ellipse (1.5cm and 0.5cm);
% Head
\draw (1.5,0.5) ellipse (0.5cm and 0.25cm);
% Eye
\fill (1.7,0.6) circle (0.05cm);
% Horn
\draw (1.5,0.75) -- (1.8,1.3);
% Legs
\draw (0.5,-0.5) -- (0.5,-1);
\draw (1,-0.5) -- (1,-1);
\draw (1.5,-0.5) -- (1.5,-1);
\draw (2,-0.5) -- (2,-1);
% Tail
\draw (0,0) .. controls (-0.5,0.5) and (-1,0) .. (-0.5,-0.5);
\end{tikzpicture}
\end{document}
```
This code will create a simple drawing of a unicorn with an oval-shaped body, a smaller oval-shaped head, a horn, four legs, and a tail. The drawing is quite basic, but you can modify the code to create a more detailed or stylized unicorn if you wish.
Here's a simple example of a unicorn drawn using TikZ in LaTeX:
```latex
\documentclass{standalone}
\usepackage{tikz}
\begin{document}
\begin{tikzpicture}
% Body
\draw (0,0) ellipse (1.5cm and 0.8cm);
% Head
\draw (1.5,0.5) ellipse (0.6cm and 0.4cm);
% Eye
\fill (1.8,0.6) circle (0.05cm);
% Horn
\draw (1.7,1) -- (2.2,1.7);
% Legs
\draw (0.5,-0.8) -- (0.5,-1.5);
\draw (1,-0.8) -- (1,-1.5);
\draw (1.5,-0.8) -- (1.5,-1.5);
\draw (2,-0.8) -- (2,-1.5);
% Tail
\draw (0,0) to[out=180,in=90] (-0.5,-0.5) to[out=-90,in=180] (0,-1);
\end{tikzpicture}
\end{document}
```
This code will create a simple drawing of a unicorn using ellipses for the body and head, lines for the legs and horn, and a curve for the tail. You can customize the appearance by modifying the coordinates, shapes, and colors.
Here's a simple example of a unicorn drawn using TikZ:
```latex
\documentclass{standalone}
\usepackage{tikz}
\usetikzlibrary{shapes,decorations.pathmorphing}
\begin{document}
\begin{tikzpicture}
% Body
\draw[fill=white] (0,0) ellipse (1.5 and 0.8);
% Head
\draw[fill=white] (1.5,0.5) ellipse (0.6 and 0.5);
% Eye
\draw[fill=black] (1.8,0.7) circle (0.1);
% Horn
\draw[decorate,decoration={coil,aspect=0.3,segment length=2mm,amplitude=2mm}] (1.8,1.2) -- (1.8,2);
% Legs
\draw[fill=white] (0.5,-0.8) rectangle (0.7,0);
\draw[fill=white] (1.3,-0.8) rectangle (1.1,0);
\draw[fill=white] (-0.5,-0.8) rectangle (-0.7,0);
\draw[fill=white] (-1.3,-0.8) rectangle (-1.1,0);
% Tail
\draw[fill=white] (-1.5,0) -- (-2.5,0.5) -- (-1.5,0.5) -- cycle;
\end{tikzpicture}
\end{document}
```
This code will create a simple unicorn illustration using TikZ. You can copy and paste this code into your LaTeX document and compile it to see the result. Note that you may need to include the TikZ package and the shapes and decorations.pathmorphing libraries if you haven't already done so.
Here's a simple example of a unicorn drawn using TikZ. You can copy and paste this code into a LaTeX document to see the result.
```latex
\documentclass{standalone}
\usepackage{tikz}
\begin{document}
\begin{tikzpicture}
% Body
\draw (0,0) ellipse (1.5cm and 0.8cm);
% Head
\draw (1.5,0.5) ellipse (0.5cm and 0.3cm);
% Eye
\fill (1.7,0.6) circle (0.05cm);
% Horn
\draw (1.7,0.9) -- (2.2,1.5);
% Legs
\draw (0.5,-0.8) -- (0.5,-1.5);
\draw (1,-0.8) -- (1,-1.5);
\draw (1.5,-0.8) -- (1.5,-1.5);
\draw (2,-0.8) -- (2,-1.5);
% Tail
\draw (0,0) to[out=180,in=90] (-0.5,-0.5) to[out=-90,in=180] (0,-1);
\end{tikzpicture}
\end{document}
```
This code will create a simple drawing of a unicorn with an oval-shaped body, a head, a horn, legs, and a tail. The drawing is quite basic, but you can modify the code to create a more detailed or stylized unicorn if you wish.
Here's a simple example of a unicorn drawn using TikZ in LaTeX:
```latex
\documentclass{standalone}
\usepackage{tikz}
\begin{document}
\begin{tikzpicture}
% Body
\draw (0,0) ellipse (1.5cm and 0.8cm);
% Head
\draw (1.5,0.5) ellipse (0.5cm and 0.3cm);
% Eye
\fill (1.7,0.6) circle (0.05cm);
% Horn
\draw (1.8,0.8) -- (2.2,1.5);
% Legs
\draw (0.5,-0.8) -- (0.5,-1.5);
\draw (1,-0.8) -- (1,-1.5);
\draw (1.5,-0.8) -- (1.5,-1.5);
\draw (2,-0.8) -- (2,-1.5);
% Tail
\draw (0,0) to[out=180,in=90] (-0.5,-0.5) to[out=-90,in=180] (0,-1);
\end{tikzpicture}
\end{document}
```
This code will create a simple drawing of a unicorn using ellipses for the body and head, lines for the legs and horn, and a curve for the tail. You can customize the appearance by modifying the coordinates, shapes, and colors.
Here's a simple example of a unicorn drawn using TikZ in LaTeX:
```latex
\documentclass{standalone}
\usepackage{tikz}
\begin{document}
\begin{tikzpicture}
% Body
\draw (0,0) ellipse (1.5cm and 0.7cm);
% Legs
\draw (0.5,0) -- (0.5,-1);
\draw (-0.5,0) -- (-0.5,-1);
\draw (1,0) -- (1,-1);
\draw (-1,0) -- (-1,-1);
% Head
\draw (1.5,0.5) -- (2.5,0.5);
\draw (2.5,0.5) arc (90:-90:0.25cm);
\draw (1.5,0.5) -- (1.5,-0.5);
% Eye
\filldraw (2.2,0.3) circle (0.05cm);
% Horn
\draw (2,0.75) -- (2.5,1.5) -- (2.5,0.75);
\end{tikzpicture}
\end{document}
```
This code will create a simple drawing of a unicorn using basic shapes and lines. You can customize the appearance by modifying the coordinates and dimensions of the shapes.
Here's a simple example of a unicorn drawn using TikZ in LaTeX:
```latex
\documentclass{standalone}
\usepackage{tikz}
\begin{document}
\begin{tikzpicture}
% Body
\draw (0,0) ellipse (1.5cm and 0.8cm);
% Head
\draw (1.5,0.5) ellipse (0.6cm and 0.4cm);
% Eye
\fill (1.8,0.6) circle (0.05cm);
% Horn
\draw (1.9,0.9) -- (2.3,1.5);
% Legs
\draw (0.5,-0.8) -- (0.5,-1.5);
\draw (1,-0.8) -- (1,-1.5);
\draw (1.5,-0.8) -- (1.5,-1.5);
\draw (2,-0.8) -- (2,-1.5);
% Tail
\draw (0,0) to[out=180,in=90] (-0.5,-0.5) to[out=-90,in=180] (0,-1);
\end{tikzpicture}
\end{document}
```
This code will create a simple drawing of a unicorn using ellipses for the body and head, lines for the legs and horn, and a path for the tail. You can customize the appearance by modifying the coordinates, shapes, and colors.
Here's a simple example of a unicorn drawn using TikZ:
```latex
\documentclass{standalone}
\usepackage{tikz}
\begin{document}
\begin{tikzpicture}
% Body
\draw (0,0) ellipse (1.5cm and 0.8cm);
% Legs
\draw (0.5,0) -- (0.5,-1.5);
\draw (1.2,0) -- (1.2,-1.5);
\draw (-0.5,0) -- (-0.5,-1.5);
\draw (-1.2,0) -- (-1.2,-1.5);
% Head
\draw (1.5,0.5) -- (2.5,1);
\draw (2.5,1) -- (2.5,0);
\draw (2.5,0) -- (1.5,-0.5);
% Horn
\draw (2.5,1) -- (3,1.5);
% Tail
\draw (-1.5,0.5) -- (-2.5,1);
\end{tikzpicture}
\end{document}
```
This code will create a simple representation of a unicorn using basic shapes and lines. You can customize the appearance by modifying the coordinates and shapes used in the drawing.
Here's a simple example of a unicorn drawn using TikZ. You can copy and paste this code into a LaTeX document to see the result.
```latex
\documentclass{standalone}
\usepackage{tikz}
\begin{document}
\begin{tikzpicture}
% Body
\draw (0,0) ellipse (1.5cm and 0.8cm);
% Head
\draw (1.5,0.5) ellipse (0.5cm and 0.3cm);
% Eye
\fill (1.7,0.6) circle (0.05cm);
% Horn
\draw (1.5,0.8) -- (1.8,1.3);
% Legs
\draw (0.5,-0.8) -- (0.5,-1.5);
\draw (1,-0.8) -- (1,-1.5);
\draw (1.5,-0.8) -- (1.5,-1.5);
\draw (2,-0.8) -- (2,-1.5);
% Tail
\draw (0,0) to[out=180,in=90] (-0.5,-0.5) to[out=-90,in=180] (0,-1);
\end{tikzpicture}
\end{document}
```
This code will create a simple drawing of a unicorn with an oval-shaped body, a head, a horn, legs, and a tail. You can modify the coordinates and shapes to create a more detailed or stylized unicorn if desired.
Here's a simple example of a unicorn drawn using TikZ in LaTeX:
```latex
\documentclass{standalone}
\usepackage{tikz}
\begin{document}
\begin{tikzpicture}
% Body
\draw (0,0) ellipse (1.5cm and 0.5cm);
% Head
\draw (1.5,0.5) ellipse (0.5cm and 0.25cm);
% Eye
\fill (1.7,0.6) circle (0.05cm);
% Horn
\draw (1.5,0.75) -- (1.8,1.2);
% Legs
\draw (0.5,-0.5) -- (0.5,-1);
\draw (1,-0.5) -- (1,-1);
\draw (1.5,-0.5) -- (1.5,-1);
\draw (2,-0.5) -- (2,-1);
% Tail
\draw (0,0) .. controls (-0.5,0.5) and (-1,0) .. (-0.5,-0.5);
\end{tikzpicture}
\end{document}
```
This code will create a simple drawing of a unicorn using ellipses for the body and head, lines for the legs and horn, and a curve for the tail. You can customize the appearance by modifying the coordinates and control points in the code.
Here's a simple example of a unicorn drawn using TikZ. You can copy and paste this code into a LaTeX document to see the result.
```latex
\documentclass{standalone}
\usepackage{tikz}
\begin{document}
\begin{tikzpicture}
% Body
\draw[fill=white] (0,0) ellipse (1.5cm and 0.8cm);
% Head
\draw[fill=white] (1.5,0.5) ellipse (0.8cm and 0.5cm);
% Eye
\draw[fill=black] (1.8,0.7) circle (0.05cm);
% Horn
\draw[fill=yellow] (1.7,1.2) -- (2.2,1.2) -- (1.95,1.8) -- cycle;
% Legs
\draw[thick] (0.5,-0.8) -- (0.5,-1.5);
\draw[thick] (1,-0.8) -- (1,-1.5);
\draw[thick] (1.5,-0.8) -- (1.5,-1.5);
\draw[thick] (2,-0.8) -- (2,-1.5);
% Tail
\draw[thick] (-1,0) .. controls (-1.5,0.5) and (-1.5,-0.5) .. (-1,0);
\end{tikzpicture}
\end{document}
```
This code will create a simple drawing of a unicorn with a body, head, eye, horn, legs, and tail. You can customize the colors and shapes as needed.
Here's a simple example of a unicorn drawn using TikZ:
```latex
\documentclass{standalone}
\usepackage{tikz}
\usetikzlibrary{shapes,decorations.pathmorphing}
\begin{document}
\begin{tikzpicture}
% Body
\draw[fill=white] (0,0) ellipse (1.5 and 0.8);
% Head
\draw[fill=white] (1.5,0.5) ellipse (0.6 and 0.5);
% Eye
\draw[fill=black] (1.8,0.7) circle (0.1);
% Horn
\draw[decorate,decoration={coil,aspect=0.3,segment length=1mm,amplitude=2mm}] (1.9,1.2) -- (2.5,2);
% Legs
\draw[fill=white] (0.5,-0.8) rectangle (0.7,0);
\draw[fill=white] (1.3,-0.8) rectangle (1.1,0);
\draw[fill=white] (1.7,-0.8) rectangle (1.9,0);
\draw[fill=white] (2.5,-0.8) rectangle (2.3,0);
% Tail
\draw[decorate,decoration={random steps,segment length=1mm,amplitude=0.5mm}] (0,0) -- (-1,1);
\end{tikzpicture}
\end{document}
```
This code will create a simple unicorn with an elliptical body and head, four legs, a coiled horn, and a wavy tail. You can customize the colors, shapes, and sizes as needed.
Here's a simple example of a unicorn drawn using TikZ in LaTeX:
```latex
\documentclass{standalone}
\usepackage{tikz}
\begin{document}
\begin{tikzpicture}
% Body
\draw (0,0) ellipse (1.5cm and 0.7cm);
% Head
\draw (1.5,0.5) ellipse (0.7cm and 0.5cm);
% Eye
\fill (1.8,0.7) circle (0.1cm);
% Horn
\draw (1.5,1.2) -- (2.2,2.2);
% Legs
\draw (0.5,-0.7) -- (0.5,-1.5);
\draw (1,-0.7) -- (1,-1.5);
\draw (1.5,-0.7) -- (1.5,-1.5);
\draw (2,-0.7) -- (2,-1.5);
% Tail
\draw (0,0) .. controls (-1,0) and (-1,-1) .. (-0.5,-1.5);
\end{tikzpicture}
\end{document}
```
This code will create a simple drawing of a unicorn using ellipses for the body and head, lines for the legs and horn, and a curve for the tail. You can customize the appearance by modifying the coordinates and control points in the code.
Here's a simple example of a unicorn drawn using TikZ in LaTeX:
```latex
\documentclass{standalone}
\usepackage{tikz}
\begin{document}
\begin{tikzpicture}
% Body
\draw (0,0) ellipse (1.5cm and 0.8cm);
% Head
\draw (1.5,0.5) ellipse (0.5cm and 0.3cm);
% Eye
\fill (1.7,0.6) circle (0.05cm);
% Horn
\draw (1.5,0.8) -- (1.8,1.3);
% Legs
\draw (0.5,-0.8) -- (0.5,-1.5);
\draw (1,-0.8) -- (1,-1.5);
\draw (1.5,-0.8) -- (1.5,-1.5);
\draw (2,-0.8) -- (2,-1.5);
% Tail
\draw (0,0) to[out=180,in=90] (-0.5,-0.5) to[out=-90,in=180] (0,-1);
\end{tikzpicture}
\end{document}
```
This code will create a simple drawing of a unicorn using ellipses for the body and head, lines for the legs and horn, and a curved path for the tail. You can customize the appearance by modifying the coordinates, shapes, and colors.
Here's a simple example of a unicorn drawn using TikZ. You can copy and paste this code into a LaTeX document to see the result.
```latex
\documentclass{standalone}
\usepackage{tikz}
\begin{document}
\begin{tikzpicture}
% Body
\draw[fill=white] (0,0) ellipse (1.5cm and 0.8cm);
% Head
\draw[fill=white] (1.5,0.5) ellipse (0.8cm and 0.5cm);
% Eye
\draw[fill=black] (1.8,0.7) circle (0.05cm);
% Horn
\draw (1.5,1) -- (2,2);
\draw (1.5,1) -- (1,2);
\draw (1,2) -- (2,2);
% Legs
\draw (0.5,-0.8) -- (0.5,-1.5);
\draw (1,-0.8) -- (1,-1.5);
\draw (1.5,-0.8) -- (1.5,-1.5);
\draw (2,-0.8) -- (2,-1.5);
% Tail
\draw (0,0) .. controls (-1,0) and (-1,1) .. (-0.5,1.5);
\end{tikzpicture}
\end{document}
```
This code will create a simple drawing of a unicorn with a body, head, eye, horn, legs, and tail. You can customize the colors, shapes, and sizes as needed.
Here's a simple example of a unicorn drawn using TikZ in LaTeX:
```latex
\documentclass{standalone}
\usepackage{tikz}
\begin{document}
\begin{tikzpicture}
% Body
\draw (0,0) ellipse (1.5cm and 0.8cm);
% Head
\draw (1.5,0.5) ellipse (0.7cm and 0.5cm);
% Eye
\fill (1.8,0.7) circle (0.1cm);
% Horn
\draw (2.2,1.2) -- (2.7,2);
% Legs
\draw (0.5,-0.8) -- (0.5,-1.5);
\draw (1,-0.8) -- (1,-1.5);
\draw (1.5,-0.8) -- (1.5,-1.5);
\draw (2,-0.8) -- (2,-1.5);
% Tail
\draw (0,0) [out=180, in=90] to (-1, -1);
\draw (0,0) [out=180, in=90] to (-1.2, -0.8);
\draw (0,0) [out=180, in=90] to (-1.4, -1.2);
\end{tikzpicture}
\end{document}
```
This code will create a simple drawing of a unicorn using ellipses for the body and head, lines for the legs and horn, and curves for the tail. You can customize the appearance by modifying the coordinates, shapes, and colors.
Here's a simple example of a unicorn drawn using TikZ. You can copy and paste this code into a LaTeX document to see the result.
```latex
\documentclass{standalone}
\usepackage{tikz}
\begin{document}
\begin{tikzpicture}
% Body
\draw (0,0) ellipse (1.5cm and 0.8cm);
% Head
\draw (1.5,0.5) ellipse (0.5cm and 0.3cm);
% Eye
\fill (1.7,0.6) circle (0.05cm);
% Horn
\draw (1.5,0.8) -- (1.8,1.3) -- (1.2,1.3) -- cycle;
% Legs
\draw (0.5,-0.8) -- (0.5,-1.5);
\draw (1,-0.8) -- (1,-1.5);
\draw (1.5,-0.8) -- (1.5,-1.5);
\draw (2,-0.8) -- (2,-1.5);
% Tail
\draw (0,0) to[out=180,in=90] (-0.5,-0.5) to[out=-90,in=180] (0,-1);
\end{tikzpicture}
\end{document}
```
This code will create a simple drawing of a unicorn with an oval-shaped body, a head, a horn, legs, and a tail. You can modify the coordinates and shapes to create a more detailed or stylized unicorn if desired.
Here's a simple example of a unicorn drawn using TikZ. You can copy and paste this code into a LaTeX document to see the result.
```latex
\documentclass{standalone}
\usepackage{tikz}
\begin{document}
\begin{tikzpicture}
% Body
\draw[fill=white] (0,0) ellipse (1.5cm and 0.8cm);
% Head
\draw[fill=white] (1.5,0.5) ellipse (0.8cm and 0.6cm);
% Eye
\draw[fill=black] (1.8,0.7) circle (0.1cm);
% Horn
\draw[fill=yellow] (1.9,1.2) -- (2.3,1.8) -- (1.5,1.2) -- cycle;
% Legs
\draw[thick] (0.5,-0.8) -- (0.5,-1.5);
\draw[thick] (1,-0.8) -- (1,-1.5);
\draw[thick] (1.5,-0.8) -- (1.5,-1.5);
\draw[thick] (2,-0.8) -- (2,-1.5);
% Tail
\draw[thick] (-1,0) .. controls (-1.5,0.5) and (-1.5,-0.5) .. (-1,0);
\end{tikzpicture}
\end{document}
```
This code will create a simple drawing of a unicorn with a body, head, eye, horn, legs, and tail. You can customize the colors and shapes as needed.
Here's a simple example of a unicorn drawn using TikZ:
```latex
\documentclass{standalone}
\usepackage{tikz}
\usetikzlibrary{shapes,decorations.pathmorphing}
\begin{document}
\begin{tikzpicture}
% Body
\draw[fill=white] (0,0) ellipse (1.5 and 0.8);
% Head
\draw[fill=white] (1.5,0.5) ellipse (0.6 and 0.5);
% Eye
\draw[fill=black] (1.9,0.7) circle (0.1);
% Horn
\draw[decorate,decoration={snake,amplitude=1mm,segment length=3mm}] (1.8,1.2) -- (2.3,2);
% Legs
\draw[fill=white] (0.5,-0.8) rectangle (0.7,0);
\draw[fill=white] (1.3,-0.8) rectangle (1.1,0);
\draw[fill=white] (-0.5,-0.8) rectangle (-0.3,0);
\draw[fill=white] (-1.3,-0.8) rectangle (-1.1,0);
% Tail
\draw[decorate,decoration={snake,amplitude=1mm,segment length=3mm}] (-1.5,0) -- (-2.5,0.5);
\end{tikzpicture}
\end{document}
```
This code will create a simple unicorn with an elliptical body, head, legs, and a tail. The horn is drawn using a snake decoration to give it a spiral appearance. You can customize the colors, shapes, and sizes to your liking.
Here's a simple example of a unicorn drawn using TikZ:
```latex
\documentclass{standalone}
\usepackage{tikz}
\usetikzlibrary{shapes,decorations.pathmorphing}
\begin{document}
\begin{tikzpicture}
% Body
\draw[fill=white] (0,0) ellipse (1.5 and 0.8);
% Head
\draw[fill=white] (1.5,0.5) ellipse (0.6 and 0.5);
% Eye
\draw[fill=black] (1.8,0.7) circle (0.1);
% Horn
\draw[decorate,decoration={coil,aspect=0.3,segment length=2mm,amplitude=2mm}] (1.9,1.2) -- (2.5,2);
% Legs
\draw[fill=white] (0.5,-0.8) rectangle (0.7,0);
\draw[fill=white] (1.3,-0.8) rectangle (1.1,0);
\draw[fill=white] (1.7,-0.8) rectangle (1.9,0);
\draw[fill=white] (2.5,-0.8) rectangle (2.3,0);
% Tail
\draw[decorate,decoration={random steps,segment length=2pt,amplitude=1pt}] (0,-0.4) -- (-0.5,-0.2);
\draw[decorate,decoration={random steps,segment length=2pt,amplitude=1pt}] (0,-0.4) -- (-0.5,-0.6);
\draw[decorate,decoration={random steps,segment length=2pt,amplitude=1pt}] (0,-0.4) -- (-0.5,-0.4);
\end{tikzpicture}
\end{document}
```
This code will create a simple unicorn illustration using TikZ. You can customize the colors, shapes, and sizes as needed.